Deployment Guide

Figure 22:AirWave > Config History
Config Archive
The Config Archive page displays the current running configuration on the selected virtual controller.
Additionally, you can run an audit on the selected virtual controller's configuration.
Clicking on the caret displays drop-down list of all audited configurations. By selecting two configurations and
clicking Delta, you can view the difference between any two configurations.
AirWave Settings
The AirWave Setting page changes depending on whether or not a virtual controller is specified.
With A Virtual Controller Specified
This page allows you to enter and save the latitude, longitude, altitude in meters, and any notes about the
specified virtual controller.
Figure 23:AirWave Settings (VC Selected)
Without A Virtual Controller Specified
This page contains a number options that allow AirWave to automatically make changes to certain settings on
any virtual controller connected to the AirWave server.
Dell Networking W-Instant in W-AirWave 8.0 | Deployment Guide Using Instant Config | 29