Deployment Guide

30 | Using Instant Config Dell Networking W-Instant in W-AirWave 8.0 | Deployment Guide
l Auto-configure Virtual Controller - Selecting Yes allows AirWave to automatically push configuration to
new virtual controllers when the are added to the group.
l Allow Configuration of Country Code: Selecting Yes allows you to manually configure the country code
for the group under IGC > Settings > General > Country Code. When No is selected, the previously
described field is grayed-out. This is set to No by default.
l Allow configuration of AirWave Settings: Selecting Yes allows you manually configure the AirWave field
under IGC > Settings > Admin. When No is selected, the previously described field is grayed-out and
AirWave pushes this information to each virtual controller in the group. This is set to No be default.
l Policy Version and Copy policy from group: These options cannot be executed at the same time.
n Policy Version: This displays the current policy version, and when selected, allows you to select another
from the drop-down menu.
n Copy policy from group: When selected, this option allows you to copy the policy from another group.
Figure 24:AirWave Settings (No VC Selected)
Where to Get Additional Information
Field-Level Help
The Instant Config pages include field-level help. Click the Help link ( )in the upper-right portion of the page
to turn on field-level help. Once enabled, the field labels switch to green italics font. Mouse over each field to
view the field-level help.
Figure 25:Field-level help
Additional Documentation
Refer to the following documents for additional information.