Users Guide

Column Description
Total Devices
Found
Displays the total number of APs detected during the scan that AirWave can configure and
monitor. Total includes both APs that are currently being managed by AirWave as well as
newly discovered APs that are not yet being managed.
New Devices
Found
Displays the number of discovered APs that are not yet managed, but are available.
Total Rogues
Found
Displays the total number of APs detected during the scan that AirWave could not
configure or monitor. Total includes both APs that have been discovered in earlier scans
as well as newly discovered APs from the most recent scan.
New Rogues
Found
Displays the number of rogue APs discovered on the most recent scan.
Start Displays the date and time the most recent scan was started.
Stop Displays the date and time the scan most recently completed.
Scheduled Displays the scheduled date and time for scans that are scheduled to be run.
Table 71: Device Setup > Discover > Discovery Execution Fields (Continued)
7. Go to the APs/Devices > New page to see a full list of the newly discovered devices that the scan detected. Figure
71 illustrates this page.
This page is only visible to users with the AirWave Administrator role or roles that have Allow authorization of APs/Devices
enabled in AMP Setup > Roles.
Figure 71:APs/Devices > New Page Illustration
What Next?
l To authorize one or more devices to a group, see "Authorizing Devices to AirWave from APs/Devices > New Page"
on page 129.
l To delete a device altogether from AirWave, select the corresponding check box for each device, and select Delete.
l Dell Networking W-Series thin APs can have Dell Networking W AP Groups specified, and Cisco thin APs can have
LWAPP AP Groups specified when they are authorized.
Dell Networking W-AirWave 8.0 | User Guide Discovering, Adding, and Managing Devices | 128