Users Guide

Field Description
IP Address
Displays the IP address that AirWave uses to communicate to the device. This number is also
a link to the AP web interface. When the link is moused over a pop-up menu will appear
allowing you to http, https, telnet or SSH to the device.
For Dell controllers, if Single Sign-On is enabled for your role in this AirWave and you have
access to this controller, you will not have to enter the credentials for this controller again after
selecting this link.
Outer IP Public IP address for a RAP device.
Remote LAN IP LAN IP address for a RAP. This address is useful for troubleshooting from the local network.
Quick Links
Open controller web UI: A drop-down menu that allows you to jump to the controller’s UI in a
new window.
For Dell controllers, if Single Sign-On is enabled for your role in this AirWave and you have
access to this controller, you will not have to enter the credentials for this controller again after
selecting this link.
Run a command: A drop-down menu with a list of CLI commands you can run directly from
the APs/Devices > Monitor page.
APs
For controllers, displays the number of APs managed by this device at the time of the last
polling.
Clients
Displays the total number of users associated to the device or its APs regardless of which
radio they are associated to, at the time of the last polling.
Usage Combined bandwidth through the device at time of polling.
Table 74: APs/Devices > Monitor > Device Info Fields and Default Values (Continued)
*These fields are only available for mesh APs. To see an example of mesh monitoring, see "Monitoring Data for Mesh Devices" on page
151.
Table 75 describes the information in the Radio table for APs:
Field Description
Index The number of the radio, used to distinguish radios that may be of the same type on a device.
Name The Radio type (802.11a/b/g/n) as a link to the Radio Statistics page for that radio.
MAC address The MAC address of the corresponding radio in the AP.
Clients The number of users associated to the corresponding radio at the time of the last polling.
Usage (Kbps)
The amount of bandwidth being pushed through the corresponding radio interface or device
at the time of the last polling.
Channel The channel of the corresponding radio.
Tx Power
Some devices report transmit power reduction rather than transmit power; no value is
reported for those devices.
Antenna Type
Indicates Internal or External radio. For devices where antenna type is defined per AP, the
same antenna type will be listed for each radio.
Table 75: APs/Devices > Monitor > Radio Fields and Descriptions
Dell Networking W-AirWave 8.0 | User Guide Discovering, Adding, and Managing Devices | 142