Users Guide

159 | Discovering, Adding, and Managing Devices Dell Networking W-AirWave 8.0 | User Guide
Figure 99:APs/Devices > Manage Page Illustration (partial view)
If any changes are scheduled for this AP, they appear in a Scheduled Changes section at the top of the page above
the other fields. The linked name of the job takes you to its System > Configuration Change Job Detail page.
2. Locate the General section for information about the AP’s current status. Table 83 describes the fields, information,
and settings.
Field Description
Name Displays the name currently set on the device.
Status
Displays the current status of an AP. If an AP is Up, then AirWave is able to ping it and
fetch SNMP information from the AP. If the AP is listed Down then AirWave is either
unable to ping the AP or unable to read the necessary SNMP information from the
device.
Configuration
Displays the current configuration status of the AP. To update the status, select Audit on
the APs/Devices > Audit page.
Last Contacted Displays the last time AirWave successfully contacted the AP.
Type Displays the type of AP.
Controller
Links to the controller that is monitoring this device.
NOTE: This field is visible for APs.
Firmware
Shows the device firmware version.
NOTE: This field is visible for controllers and switches.
Table 83: APs/Devices > Manage > General Fields and Descriptions