Users Guide

181 | Creating and Using Templates Dell Networking W-AirWave 8.0 | User Guide
Setting Description
Device Type
Displays the template that applies to APs or devices of the specified type. If (Any Model) is
selected for a vendor, then the template applies to all models from that vendor that do not have a
version-specific template defined. If there are two templates that might apply to a device, the
template with the most restrictions takes precedence.
Status Displays the status of the template.
Fetch Date Sets the date that the template was originally fetched from a device.
Version
Restriction
Designates that the template only applies to APs running the version of firmware specified. If the
restriction is None, then the template applies to all the devices of the specified type in the group.
If there are two templates that might apply to a device the template with the most restrictions takes
precedence. If there is a template that matches a devices firmware it will be used instead of a
template that does not have a version restriction.
Table 90: Groups > Templates Fields and Default Values (Continued)
3. To create a new template and add it to the AirWave template inventory, go to the Groups > List page, and select the
group name. The Details page appears.
4. Select Templates, and then Add.
5. Complete the configurations illustrated in Figure 114.
Figure 114:Groups > Templates > Add Template Page Illustration
The settings for the Add a Template page are described in Table 91. Note that the fields can vary based on the Group.