Users Guide

Field Description
Device Type The type of device determined by AMP Setup > Device Type Setup rules.
Duration The length of time the MAC address has been associated.
EAP
Supplicant
The party being authenticated in the Extensible Authentication Protocol.
Forward
Mode
Forwarding mode for the port: Bridge, Tunnel, or Split Tunnel.
Goodput
The ratio of the total bytes transmitted or received in the network to the total air time required for
transmitting or receiving the bytes. Note that this information is not available for Instant devices.
Group The group containing the AP that the user is associated with.
Guest User Specifies whether the user is a guest.
Interface The interface on the device to which the user is connected.
LAN
Hostname
The LAN hostname of the user MAC.
LAN IP
Address
The IP assigned to the user MAC. AirWave gathers it from the association table of APs.
Location
If a value appears here, the location of this user’s client has been mapped on VisualRF. Select
the location to open a new VisualRF Floor Plan Location window.
MAC Address
The radio MAC address of the user associated to APs as a link to the Users > Detail page for this
user.
Manufacturer The manufacturer of the user’s device.
Model The model of the user’s device.
Name The product of the user’s device.
Network
Chipset
The chipset indicates the functions the device was designed to perform.
Network
Driver
Driver name or other information.
Notes Notes about the user.
OS The device’s operating system type.
OS Detail Additional information on the operating system such as version numbers.
Phone
Number
Contact number for the user.
Role
Specifies the role that the Dell Networking W-Series controller assigned to the connected user,
such as employee.
Table 120: Clients > Connected Table Columns and Links(Alphabetical) (Continued)
Dell Networking W-AirWave 8.0 | User Guide Performing Daily Administration in AirWave | 242