Users Guide

243 | Performing Daily Administration in AirWave Dell Networking W-AirWave 8.0 | User Guide
Field Description
Serial
Number
Serial number of the device.
Service End Ending timestamp of the device usage.
Service Start Beginning timestamp of the device usage.
Sig. Qual. The average signal quality the user experienced.
SSID The SSID with which the user is associated.
Speed
The packet and byte counts of data frames successfully transmitted to and received from
associated stations. Note that this information is not available for Instant devices.
Tunneled
Controller
If a user is connected to a Dell Networking W-Series Mobility Access Switch, this indicates which
controller the user is authenticated to.
Username
Displays the name of the user associated to the AP. AirWave gathers this data from device traps,
SNMP polling, or RADIUS accounting. Usernames appear in italics when a username for that
MAC address has been stored in the database from a previous association, but AirWave is not
getting a username for the current association. This may indicate that the user has not yet been
authenticated for this session or AirWave may not be getting a username from an external
source.
VLAN Displays the VLAN assigned to the user, if available.
Table 120: Clients > Connected Table Columns and Links(Alphabetical) (Continued)
Monitoring Rogue Clients With the Clients > Rogue Clients Page
You can view connected rogue clients in AirWave by selecting the Clients > Rogue Clients page. In this page, you can
click on the MAC address of a rogue to view the Client Details page or on a Rogue AP link to view the RAPIDS >
Details page for the AP. Figure 144 illustrates the Clients > Rogue Clients page.
Figure 144:Clients > Rogue Clients Page Illustration
Table 121 describes the fields on this page.