Users Guide

273 | Performing Daily Administration in AirWave Dell Networking W-AirWave 8.0 | User Guide
Figure 171:Public Portal Page Illustration
The Public Portal supports configuration of the iPhone interface. This can be configured using the Master Console
AirWave page.
Adding a Managed AMP with the Master Console
Perform the following steps to add a managed AMP console.
1. Navigate to the Home > Managed AMPs page.
2. Select the pencil icon to edit or reconfigure an existing AMP console, or select Add New Managed AMP to create a
new AMP console. The Managed AMP page appears. Complete the settings on this page as described in Table 130.
Field Default Description
Hostname / IP Address N/A Enter the IP address or Hostname of the AirWave server to be managed.
Polling Enabled Yes
Enables or disables the Master Console polling of managed AirWave
server.
Polling Period
5
minutes
Determines how frequently the Master Console polls the managed
AirWave server.
Username N/A
The username used by the Master Console to login to the managed
AirWave server. The user needs to be an AP/Device Manager or AirWave
Administrator.
Password
(Confirm Password)
N/A
The password used by the Master Console to login to the managed
AirWave server.
HTTP Timeout
(5-1000 sec)
60
Defines the timeout period used when polling the managed AirWave
server.
Manage Group
Configuration
No
Defines whether the Master Console can manage device groups on the
managed AirWave server.
Table 130: Managed AMP fields and default values
3. When finished, select Add to return to the Managed AMPs list page.