Users Guide

305 | Creating, Running, and Emailing Reports Dell Networking W-AirWave 8.0 | User Guide
Field Description
Folder/AP/Client
The total number of matches that occurred in each folder, each AP, and each
Client. The tables also include a reason for the match event. This information is
obtained directly from the controller.
Data will only display for a Folder, AP, and Client if each has experienced at least
one match event.
Device Type Summary
This shows the total number and percentage of match events that occurred on all
device types (for example, iPhone, Kindle, etc.). The graph shows the top 5
devices.
Reasons for Match
Summary
This graph and table break down the number and percentage of matches based
on the match reason.
Connection Mode Summary
This graph and table show the number and percentage of matches based on the
device's connection mode.
Table 145: Match Event Report output details
Using the Memory and CPU Utilization Report
The Memory and CPU Utilization Report displays the top percentage of memory utilization and usage for devices and
CPUs. You can filter this report to show memory and utilization information for specific devices (Controllers, APs, etc.)
By default, this report will show up to 10 IDS for each specified device type. You can change this value to anything
other than 0.
To create a scheduled and generated report of this type, refer to "Using Daily Reports" on page 287.
Figure 189 illustrates the this report.