Users Guide

329 | Using VisualRF Dell Networking W-AirWave 8.0 | User Guide
Operation Icon Description
Preferences
Configure personal viewing preferences. The Preferences menu
allows you to configure user preferences (APs, Clients, overlay
types, grid lines, alerts, icon sizes, etc.). See "Configuring Flash UI
Personal Preferences" on page 329 for more details.
Help
Launch the online help.
NOTE: This User Guide currently contains the most up-to-date
help information for the VisualRF interface.
Table 153: Top Level Icons and Descriptions (Continued)
Figure 208:Properties for a Mesh Gateway Illustration
For radio-level status information on an AirMesh device in your network, select the menus in the AP’s popup window
for each radio (11na Radio, Access; 11na Radio, Mesh; and so forth).
Configuring Flash UI Personal Preferences
The VisualRF Mesh view and the flash-based UI network view includes menus to set personal display preferences. To
view or change these settings, select the Preferences icon on the VisualRF > Floor Plans page and choose from the
options that follow. These preferences are stored in the database, so they are retained across browsers and machines.
These options are available in the legacy Flash-based UI only, and do not appear in the default HTML5 UI.
General Flash UI Preferences
From the VisualRF > Floor Plans page, click the Preferences icon, then select General from the Configure Preferences
for drop-down menu, as shown in Figure 209.