Users Guide

347 | Using VisualRF Dell Networking W-AirWave 8.0 | User Guide
2. Right-click the floor and select Duplicate.
3. Enter the following information:
l Starting and ending floors
l Select the toggles to copy walls, regions, data rates (speeds), and AP placement
The starting floor will add one to the highest floor in the building and the ending floor defaults to 10 more than the
starting floor.
4. Select OK to save your changes.
5. Manually refresh page and your is redirected to the VisualRF > Floor Plan page. The Building view will reflect the
new floors.
Location Testing Regions
This region type is reserved for internal testing purposes, and is not available in the HTML5 UI.
Wiring Closets
A wiring closet is a specialized region that allows you to define a new rack and provision or add rackmount devices. To
add a Wiring Closet to a floor plan using the Flash-based VisualRF UI, follow these steps:
1. In the Edit menu, select the Draw Region option.
2. Outline the desired region. Double click or press Ctrl+click to end the outline process.
3. Name the region, select the Wiring Closet region type and click OK, as shown in Figure 220.
Figure 220:Adding a new Wiring Closet Region
Now that the Wiring Closet is defined you will see a green Wiring Closet icon on your floor plan. Double click that
icon.
1. Add a rack to the wired closet by selecting the Add Empty Rack icon and dragging it to the background.
2. To add a planned device, select the Add Planned Device icon to view the Manually Provision Rack Gear menu.
Select the device type in the Type menu, and then find the device you want to add. Drag it into the rack at the
appropriate location.
3. To add a wired device that is currently being monitored by AirWave, select Add Deployed Device.
a. Locate the device to be added.
b. Drag the device to the appropriate location in the rack.