Users Guide

361 | Using VisualRF Dell Networking W-AirWave 8.0 | User Guide
Figure 235:Show Location History
A location history player, illustrated in Figure 236, appears at the bottom of the VisualRF window.
Figure 236:Location History Player
Checking Signal Strength to Client Location
1. On a floor plan, locate the Signal Cutoff menu.
2. Select the desired signal level to display, as shown in Figure 237. The heatmap updates immediately.
Figure 237:Signal Cutoff dBm Dropdown Menu
Viewing an AP’s Wireless RF Environment
To view an access point's RF environment from APs/Devices > Monitor page:
1. Select a device of interest from APs/Devices > List, or any other AirWave page that lists your APs. The APs/Devices
> Monitor page opens.
2. Click on the VisualRF thumbnail showing the location of the AP. This is located on the right side of the Monitoring
graphs, as shown in Figure 238: