Users Guide

4 | Contents Dell Networking W-AirWave 8.0 | User Guide
User Roles and VisualRF 43
Creating AirWave User Roles 43
Configuring Login Message, TACACS+, RADIUS, and LDAP Authentication 48
Setting Up Login Configuration Options 49
Configuring Whitelists 49
Setting Up Certificate Authentication 50
Setting Up Single Sign-On 50
Specifying the Authentication Priority 51
Configuring RADIUS Authentication and Authorization 51
Integrating a RADIUS Accounting Server 52
Configuring TACACS+ Authentication 53
Configuring LDAP Authentication and Authorization 55
Enabling AirWave to Manage Your Devices 58
Configuring Communication Settings for Discovered Devices 58
Loading Device Firmware Onto AirWave (optional) 61
Setting Up Device Types 64
Configuring Cisco WLSE and WLSE Rogue Scanning 65
Introduction to Cisco WLSE 65
Initial WLSE Configuration 66
Adding an ACS Server for WLSE 66
Enabling Rogue Alerts for Cisco WLSE 66
Configuring WLSE to Communicate with APs 66
Discovering Devices 66
Managing Devices 67
Inventory Reporting 67
Defining Access 67
Grouping 67
Configuring IOS APs for WDS Participation 67
WDS Participation 68
Primary or Secondary WDS 68
Configuring ACS for WDS Authentication 68
Configuring Cisco WLSE Rogue Scanning 68
Configuring ACS Servers 70
Integrating AirWave with an Existing Network Management Solution (NMS) 71
Auditing PCI Compliance on the Network 73
Introduction to PCI Requirements 73
PCI Auditing 73
Enabling or Disabling PCI Auditing 75
Deploying WMS Offload 76
Overview of WMS Offload in AirWave 76
General Configuration Tasks Supporting WMS Offload in AirWave 76
Additional Information Supporting WMS Offload 77
Configuring and Using Device Groups 78
AirWave Groups Overview 80
Viewing All Defined Device Groups 81
Configuring Basic Group Settings 82
Adding and Configuring Group AAA Servers 91
Configuring Group Security Settings 92
Configuring Group SSIDs and VLANs 96
Configuring Radio Settings for Device Groups 100