Users Guide

42 | Configuring AirWave Dell Networking W-AirWave 8.0 | User Guide
2. Select Add to create a new user, select the pencil icon to edit an existing user, or select a user and select Delete to
remove that user from AirWave. When you select Add or the edit icon, the Add User page appears, illustrated in
Figure 17.
A current user cannot change his/her own role. The Role drop-down field is disabled to prevent this.
Figure 17: AMP Setup > Users > Add/Edit User Page Illustration
3. Enter or edit the settings on this page. Table 17 describes these settings in additional detail.
Setting Default Description
Username None
Sets the username as an alphanumeric string. The Username is used when logging
in to AirWave and appears in AirWave log files.
Role None
Specifies the user’s Role, which defines the Top viewable folder as well as the type
and access level of the user specified in the previous field.
The admin user defines user roles on the AMP Setup > Roles page, and each user
in the system is assigned to a role.
Password None
Sets the password for the user being created or edited. Enter an alphanumeric
string without spaces, and enter the password again in the Confirm Password field.
NOTE: Because the default user's password is identical to the name, it is strongly
recommended that you change this password. Changing your password will log
you out.
Name None
Allows you to define an optional and alphanumeric text field that takes note of the
user's actual name.
Table 17: AMP Setup > Users > Add/Edit User Fields and Default Values