Users Guide

72 | Configuring AirWave Dell Networking W-AirWave 8.0 | User Guide
Figure 34:AMP Setup >NMS Page Illustration
2. Select Add to integrate a new NMS server, or select the pencil icon to edit an existing server. Provide the information
described in Table 37:
Setting Default Description
Hostname None Cites the DNS name or the IP address of the NMS.
Port 162
Sets the port AirWave uses to communicate with the NMS.
NOTE: AirWave generally communicates via SNMP traps on port
162.
Community String None Sets the community string used to communicate with the NMS.
SNMP Version 2C Sets the SNMP version of the traps sent to the Host.
Enabled Yes Enables or disables trap logging to the specified NMS.
Send Configuration Traps Yes Enables NMS servers to transmit SNMP configuration traps.
Table 37: AMP Setup >NMS Integration Add/Edit Fields and Default Values
3. The NMS Integration Add/Edit page includes the Netcool/OMNIbus Integration link to information and
instructions. The IBM Tivoli Netcool/OMNIbus operations management software enables automated event correlation
and additional features resulting in optimized network uptime.
4. The NMS Integration Add/Edit page includes the HP ProCurve Manager Integration link. Select this link for
additional information, zip file download, and brief instructions for installation with AirWave. Select Add to finish
creating the NMS server or Save to configure an existing NMS server.
What Next?
l Go to additional tabs in the AMP Setup section to continue additional setup configurations.