Administrator Guide

Figure 14 Enable Admin User Roles in AMP Setup > Roles
2. In Groups > Template for the newly created group, verify the first Virtual Controller's auto-created template.
The auto-created template is most useful if the first Virtual Controller for the top-level Organization String is fully configured
on-site before it is pointed at AirWave in the Virtual Controller’s UI.
3. Evaluate, approve, or ignore incoming Virtual Controllers with a different top level Organization String and/or
Shared Secret in the APs/Devices > New list. Subsequent IAPs are auto-authorized if they have an
Organization/Shared Secret key that matches the Shared Secret key of any existing authorized Virtual Controller in
the top-level Organization String.
4. Set the initial Virtual Controller to Manage Read/Write mode and push the good configuration to the subsequent
IAPs.
5. Set up AirWave users to have access to specific folders, if desired.
Updating the Instant Template
As stated previously, the first Instant network that is added to AirWave automatically includes the default configuration
that is used as the template to provision other Instant networks. You can view and, if necessary, edit this template
directly on the Groups > Templates configuration page.
Be sure that the default configuration is validated and has been pre-tested in a non-production environment prior to
applying it to a production network. Any changes that are made to this configuration will follow the same process each time
and will be applied to other Instant networks.
16 Dell Networking W-Instant in W-AirWave 7.7 | Deployment Guide