Administrator Guide

Figure 15 The Instant template editor
If you want to add additional variables to the template, the Allowed Variables section just to the right of the Instant
template editor shows you the set of variables that can be added.
Figure 16 Allowed variables
Refer to the Dell Networking W-AirWave 7.7 User Guide or detailed information about templates and variables.
Best Practices
l Keep Dell Networking W-Instant devices in Monitor Only mode to audit the device and to ensure that
configurations are not automatically pushed. This practice is consistent with the rest of AirWave.
l Be sure that the default configuration is validated and has been pre-tested in a non-production environment prior to
applying it to a production network. Any changes that are made to this configuration will follow the same process
each time and will be applied to other Dell Networking W-Instant networks.
l If you modify a device's configuration through the Instant user interface, we recommend that you put the device in
Manage Mode, and then use the Import Settings button from the APs/Devices > Manage page. With this method,
Dell Networking W-Instant in W-AirWave 7.7 | Deployment Guide 17