Setup Guide

Figure 8 APs/Devices > Interfaces Page for Wired Devices (partial view)
.
The Interfaces page includes a summary of all the interfaces at the top. In case of the stacked switches, the master
includes the interfaces of all the members including its own. The physical and the virtual interfaces are displayed in
separate tables, labeled Physical Interfaces and Virtual Interfaces. VLANs are listed below the interface.
The Interfaces page for AirMesh APs includes VLANs as part of the Virtual Interfaces. When no management interface is
specified, VLAN1 will be treated as management interface. If VLAN1 does not exist, then ethernet 0 will be treated as the
management interface.
AirWave monitors Up/Down status and bandwidth information on all interfaces. You can edit multiple interfaces
concurrently by selecting one of the two Edit Interfaces hyperlinks. Interface labels are used to group one or more
interfaces for the purpose of defining interface bandwidth triggers.
Understanding the APs/Devices > Monitor Pages for All Device Types
You can quickly go to any device’s monitoring page once you go to its specific folder or group on the APs/Devices >
List page by selecting its hyperlinked name in the Device column.
All Monitor pages include a section at the top displaying information such as monitoring/configuration status, serial
number, total users, firmware version, and so on, as shown in Figure 9.
Dell Networking W-AirWave 7.7 | Getting Started Guide Monitoring Practices | 25