Setup Guide

6 | Overview Dell Networking W-AirWave 7.7 | Getting Started Guide
1. The first step to add a device manually is to select the vendor and model. Browse to the Device Setup > Add page
and select the vendor and model of the device to add. "Device Setup > Add Page Illustration" on page 6 illustrates
this page.
Figure 1 Device Setup > Add Page Illustration
2. Select Add. The Device Communications and Location sections appear, illustrated in "Device Setup > Add >
Device Communications and Location Sections" on page 6.
Figure 2 Device Setup > Add > Device Communications and Location Sections
3. Complete the Device Communications and Location settings for the new device. Settings can differ from device to
device based on the type of device and the features that the device supports. In several cases, the default values from
any given device derive from the Device Setup > Communication page.
4. In the Location field, select the appropriate group and folder for the device.