Users Guide

Dell PowerConnect W-AirWave 7.5 | User Guide Configuring and Using Device Groups | 101
Modifying Multiple Devices
AirWave provides a very powerful utility that modifies all APs or a subset of access points unrelated to the typical
AirWave group construct. This utility provides the ability to delete simultaneously multiple devices, migrate
multiple devices to another group and/or folder, update credentials and optimize channels. Perform these steps to
modify multiple devices.
1. To modify multiple devices, go to one of the following pages with a device list:
 APs/Devices > List
 APs/Devices > Up
 APs/Devices > Down
 APs/Devices > Mismatched
 Groups > Monitor
Each of these pages displays a list of devices. Controller monitoring pages also have lists of their thin APs
which can be modified using Modify Devices.
2. Select Modify Devices to make the checkboxes at the left of all devices appear. In addition, a new section
appears in this page location to display various settings that can be configured for multiple devices at one time
(some operations cannot be performed on the selected devices). Figure 68 illustrates this page.