Users Guide

Dell PowerConnect W-AirWave 7.5 | User Guide Discovering, Adding, and Managing Devices | 119
Figure 82 APs/Devices > List (partial view)
Verify that the devices you added are now appearing in the APs/Devices > Up page.
The same section also appears on the Groups > Monitor page and is hyperlinked from a controller's monitoring
interface.
The Alert Summary section of APs/Devices > List cites the number of events that have occurred in the last two
hours, the last 24 hours, and total. There are three categories of alerts as listed below:
 AMP Alerts
 IDS Events
 RADIUS Authentication Issues
For more information on the Alert Summary table, refer to “Viewing Alerts” on page200.
Understanding the APs/Devices > Monitor Pages for All Device Types
You can quickly go to any device’s monitoring page once you go to its specific folder or group on the APs/Devices
> List page by selecting its hyperlinked name in the Device column.
All Monitor pages include a section at the top displaying information such as monitoring/configuration status,
serial number, total users, firmware version, and so on, as shown in Figure 83.
NOTE: Newly added devices will have a status of Down until they have been polled the first time. Their configuration status will
remain Unknown until they have finished verification. The Up status is not contingent on verification.
NOTE: The Alert Summary table is also a feature of the Home > Overview page and has the same links in that location.