Users Guide

Dell PowerConnect W-AirWave 7.5 | User Guide Discovering, Adding, and Managing Devices | 135
Figure 98 Interface Monitoring Page for a Wired Device
An Interface Monitoring page is comprised of three sections: Interface Information, Usage and Interface Frame
Counters graphs, and Connected Clients.
Specifics of the interface are in the Interface Information section, as depicted in Figure 99.
Figure 99 Individual Interface Information Section
Bandwidth, and various standard and enterprise specific error counting information is displayed in the lower
section in a tabbed graph, which are shown in Figure 98 above.
Connected Clients, if any, are listed in a table below the interactive graphs as shown in Figure 100.
Figure 100 Connected Clients list in APs/Devices > Interface Monitoring for a selected interface
What Next?
All device lists in AirWaveact as portals to management pages if you have the proper read/write privileges.
Selecting the wrench or pencil icon next to a device table entry, or selecting Modify Devices where appropriate
above a device table, will take you to the appropriate Management page (APs/Devices > Manage). For more
information, see “Configuring and Managing Devices” on page137.