Users Guide

Dell PowerConnect W-AirWave 7.5 | User Guide Creating, Running, and Emailing Reports | 245
Selecting the AP device or controller name takes you to the APs/Devices > List page.
Figure 178 and Table 136 illustrate and describe the Reports > Generated > IDS Events Detail page.
Figure 178 Reports > Generated > IDS Events Report Illustration
Using the Inventory Report
The Inventory Report itemizes all devices and firmware versions on the network, to include vendor information
and graphical pie-chart summaries. The primary sections of this report are as follows:
 Vendor Summary—Lists the vendors for all devices or firmware on the network.
 Firmware Version Summary—Lists the firmware version for all firmware used on the network.
 Model Summary—Lists the model numbers for all devices or firmware on the network.
See Figure 179 for an illustration of a sample report.
Table 136 Reports > Generated > IDS Events Detail Unique Fields and Descriptions
Field Description
Attack Displays the name or label for the IDS event.
Controllers This column lists the controllers for which IDS events have occurred in the prior 24 hours, and
provides a link to the APs/Devices > Monitor
page for each.
Attacker Displays the MAC address of the device that generated the IDS event.
Radio Displays the 802.11 radio type associated with the IDS event.
Channel Displays the 802.11 radio channel associated with the IDS event, when known.
SNR Displays the signal-to-noise (SNR) radio associated with the IDS event.
Precedence Displays precedence information associated with the IDS event, when known.
Time Displays the time of the IDS event.