Users Guide

Table Of Contents

Dell PowerConnect W-AirWave 7.5 | User Guide Using VisualRF | 299

5. Select whether to navigate by Group or by Folder in the View By field.

6. Expand the Group or Folder containing the access points which need to be provisioned on this floor plan.

Note that by default, devices that have already been added to VisualRF are hidden. To show them, clear the

“Hide Devices already added to VisualRF” checkbox at the bottom of the list.

7. Click and drag an AP to its proper location on the floor, as shown in Figure 240:

Figure 240 Provisioning APs onto the Floor Plan

8. Once all APs are provisioned on the floor plan, select Save (floppy disk icon) in the top right of the QuickView

window.

Automatically Provisioning APs onto a Floor Plan

To automatically provision your access points onto your floor plan:

1. Select Draw Region from the Edit menu. A new provisioning popup appears as shown in 4. with a crosshair

pointer.

NOTE: Alternatively, you can use the Search field.

NOTE: The floor is submitted to one of the core threads to recalculate path loss and then to one of the location caching threads to

recalculate client locations. All changes may not be visible on a refresh until this process complete.