Users Guide

42 | Configuring AirWave Dell PowerConnect W-AirWave 7.5 | User Guide
Each general user that you add must have a user name, a password, and a role. Use unique and meaningful user
names as they are recorded in the log files when you or other users make changes in AirWave.
The user role defines the user type, access level, and the top folder for that user. User roles are defined on the
AMP
Setup > Roles page. Refer to the previous procedure in this chapter for additional information, “Creating
AirWave User Roles” on page38.
The
admin user can provide optional additional information about the user, including the user's real name, email
address, phone number, and so forth.
Perform the following steps to display, add, edit, or delete AirWave users of any privilege level. You must be an
admin user to complete these steps.
1. Go to the AMP
Setup > Users page. This page displays all users currently configured in AirWave. Figure 23
illustrates the contents and layout of this page.
Figure 23 AMP Setup > Users Page Illustration
2. Select Add to create a new user, select the pencil icon to edit an existing user, or select a user and select Delete
to remove that user from AirWave. When you select Add or the edit icon, the Add User page appears,
illustrated in Figure 24.
Figure 24 AMP Setup > Users > Add/Edit User Page Illustration
NOTE: Username and password are not required if you configure AirWave to use RADIUS, TACACS, or LDAP authentication. You
do not need to add individual users to the AirWave server if you use RADIUS, TACACS, or LDAP authentication.
NOTE: A current user cannot change his/her own role. The Role drop-down field is disabled to prevent this.