Deployment Guide

Other Third-Party Devices with Monitoring Support
This version of AirWave supports monitoring for a variety of devices with software versions listed in the table
below.
The firmware versions listed in the table below represents the latest firmware version verified as fully supported by
AirWave 8.0. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full
support for these later versions is not guaranteed.
The firmware versions llisted in the table below represents the latest firmware version verified as fully supported
by AirWave 8.0. Informal testing shows that AirWave supports devices running more recent versions of
firmware, but full support for these later versions is not guaranteed.
Device Validated up to
BelAir 200 main.2005.03.29
Brocade ICX switches 08.0.20T211 and 08.0.30aT213
Proxim AP-600/700
Proxim AP 2000/4000
2.0 – 4.0.2
Proxim Tsunami MP.11 QB 954-x, 2454-x, 4954-x, 5054-x 2.3.0 – 4.0.0
Symbol 3021 04.01-23 – 04.02-19
Symbol 4121/4131 3.51-20 – 3.95-04
Symbol 5131/5181 1.1.0.0.045R – 2.5.0.0
Trapeze MXR-2, MXR-8, MXR-20, MXR-2xx, MX-400,
MP-3x2, MP-422
5.0.12.2 – 7.0.5.6
Tropos 3/4/5210/5320/9422/9532 5.1.4.7 – 6.6.1.3
Table 11: Other Supported Devices
Other Switches
Some switches have additional support in AirWave:
Alcatel-Lucent OmniSwitch™ (6250 and 6450)
l Automated discovery through SNMP
l Model & software version identification
l Stack information
l Firmware version 6.6.1.859.R01
Brocade
l Automated discovery through SNMP
l Model & software version identification
l Firmware version 08.0.20T211 and 08.0.30aT213
l Stacking
Dell Networking W-AirWave 8.0 | Supported Infrastructure Devices 11