Deployment Guide

Model Validated Up to
ProCurve 530 WA.01.16-WA.02.19
ProCureve 2626-PWR H.10.35 (ROM H.08.02)
5406 zl Switch K.12.43 (ROM:K.12.12)
830 Unified Wired-WLAN Switch* 5.20.109 (Release 2607P39)
850 Unified Wired-WLAN Switch* 5.20.109 (Release 2607P39)
870 Unified Wired-WLAN Switch* 5.20.109 (Release 2607P39)
7500 Switch Series* 5.20.109 (Release 2607P39)
10500 Switch Series* 5.20.109 (Release 2607P39)
HP WESM controllers & APs
l xl
l zl
l WS.01.05 – WS.02.19
l WT.01.03 – WT.01.28
*These HP devices are not supported in VisualRF.
Table 7: HP Device Support (Continued)
HP ProCurve
HP ProCurve switches have the following additional support through AirWave:
l Automated discovery through SNMP
l Model & software version identification
Juniper
®
Devices
The following Juniper controllers and APs are supported for monitoring, configuration, and software upgrades.
The firmware versions listed in the table below represents the latest firmware version verified as fully supported by
AirWave 8.0. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full
support for these later versions is not guaranteed.
Model Validated up to
WLA321 9.1.0.6.0
WLA322 9.1.0.6.0
WLA522 9.1.0.6.0
WLA532 9.1.0.6.0
WLA632 9.1.0.6.0
WLC100 9.1.0.6.0
WLC2 9.1.0.6.0
WLC2800 9.1.0.6.0
Table 8: Juniper AP Support
8 Dell Networking W-AirWave 8.0 | Supported Infrastructure Devices