Reference Guide

rssi => -64
tag_mac => 00:14:7E:00:4C:E4
timestamp => 303139810
tx_power => 19
Verify external applications can see WiFi Tag information by exercising the Tag XML API:
https://<AMP-Server-IP>/visualrf/rfid.xml
You should see the following XML output:
<visualrf:rfids version=1>
<rfid battery-level=0 chirp-interval= radio-mac=00:14:7E:00:4C:E0
vendor=>
<radio phy=g xmit-dbm=10.0/>
<discovering-radio ap=SC-MB-03-AP10 dBm=-91 id=811 index=1
timestamp=2008-10-21T12:23:30-04:00/>
<discovering-radio ap=SC-MB-03-AP06 dBm=-81 id=769 index=1
timestamp=2008-10-21T12:23:31-04:00/>
<discovering-radio ap=SC-MB-01-AP06 dBm=-63 id=708 index=1
timestamp=2008-10-21T12:23:31-04:00/>
<discovering-radio ap=SC-MB-02-AP04 dBm=-88 id=806 index=1
timestamp=2008-10-21T12:22:34-04:00/>
</rfid>
<rfid battery-level=0 chirp-interval= radio-mac=00:14:7E:00:4B:5C
vendor=>
<radio phy=g xmit-dbm=10.0/>
<discovering-radio ap=SC-MB-03-AP06 dBm=-74 id=769 index=1
timestamp=2008-10-21T12:23:20-04:00/>
<discovering-radio ap=SC-MB-01-AP06 dBm=-58 id=708 index=1
timestamp=2008-10-21T12:23:20-04:00/>
<discovering-radio ap=SC-MB-03-AP02 dBm=-91 id=734 index=1
timestamp=2008-10-21T12:23:20-04:00/>
</rfid>
<rfid battery-level=0 chirp-interval= radio-mac=00:14:7E:00:4D:06
vendor=>
<radio phy=g xmit-dbm=10.0/>
<discovering-radio ap=SC-SB-GR-AP04 dBm=-91 id=837 index=1
timestamp=2008-10-21T12:21:08-04:00/>
<discovering-radio ap=SC-MB-03-AP06 dBm=-79 id=769 index=1
timestamp=2008-10-21T12:22:08-04:00/>
<discovering-radio ap=SC-MB-01-AP06 dBm=-59 id=708 index=1
timestamp=2008-10-21T12:23:08-04:00/>
<discovering-radio ap=SC-MB-02-AP04 dBm=-90 id=806 index=1
timestamp=2008-10-21T12:22:08-04:00/>
</rfid>
</visualrf:rfids>
Wi-Fi Tag Setup Guidelines
l Ensure that the tags can be heard by at least three (3) access points from any given location. The recommended
value is is 4 APs.
l Ensure that the tags chirp on all regulatory channels.
Dell PowerConnect W-AirWave 7.6 | Best Practices Guide Increasing Location Accuracy | 43