Setup Guide

26 | Dell Networking W-Series Specific Capabilities in AirWave Dell Networking W-AirWave 8.0 | Best Practices Guide
Remote AP Monitoring
To monitor remote APs, follow these steps:
1. From the APs/Devices > List page, filter on the Remote Device column to find remote devices.
2. To view detailed information about the remote device, select the device name. The page illustrated in Figure 15
appears.
Figure 15:Remote AP Detail Page
You can also see if there are users plugged into the wired interfaces in the Connected Clients list below the Clients and
Usage graphs.
This feature is only available when the remote APs are in split tunnel and tunnel modes.
ARM and Channel Utilization Information
ARM statistics and Channel utilization are very powerful tools for diagnosing capacity and other issues in your WLAN.
1. Navigate to an APs/Devices > Monitor page for any AP that supports ARM and channel utilization.
2. In the Radios table, select a radio link under the Name column for a radio.
3. The graphs default to Client and Usage. Select an icon for each to change the graphs to display Radio Channel and
Channel Utilization.