Setup Guide
Figure 19:Channel Utilization Trigger
3. Enter the duration evaluation period.
4. Click the Add New Trigger Condition button.
5. Create a trigger condition for Radio Type and select the frequency to evaluate.
6. Select total, receive, transmit, or interference trigger condition.
7. Set up any restrictions or notifications. (Refer to the Dell Networking W-AirWave 8.0 User Guidefor more details.)
8. When you are finished, click Add.
Viewing Channel Utilization Alerts
You can view Channel Utilization alerts from the APs/Devices > Monitor page and on the System > Alerts page.
Channel Utilization Alerts on the APs/Devices > Monitor Page
1. Navigate to APs/Devices > Monitor page for a selected device.
2. Scroll down to the Alert Summary page and select AirWave Alerts.
Dell Networking W-AirWave 8.0 | Best Practices Guide Dell Networking W-Series Specific Capabilities in AirWave | 29