Setup Guide

Rules-Based Controller Classification
This section contains the following topics:
l "Using RAPIDS Defaults for Controller Classification" on page 33
l "Changing RAPIDS Based on Controller Classification" on page 33
Using RAPIDS Defaults for Controller Classification
1. Navigate to the RAPIDS > Rules page and select the pencil icon beside the rule that you want to change.
2. In the Classification drop-down list, select Use Controller Classification (see Figure 26 below).
3. Click Save.
Figure 26:Using Controller Classification
Changing RAPIDS Based on Controller Classification
1. Navigate to RAPIDS > Rules and select the desired rule.
2. In the Classification menu, select the RAPIDS classification.
3. Select Controller Classification (see Figure 27 below).
Dell Networking W-AirWave 8.0 | Best Practices Guide Dell Networking W-Series Specific Capabilities in AirWave | 33