Setup Guide

6 | Configuring W-AirWave for Global W-Series Infrastructure Dell Networking W-AirWave 8.0 | Best Practices Guide
1. Navigate to Device Setup > Communication.
2. In the Default Credentials section, select the Edit link next to Dell. The page illustrated in Figure 3 appears.
3. Enter the SNMP Community String.
Be sure to note the community string because it must match the SNMP trap community string, which is configured later in
this document.
Figure 3:Credentials in Device Setup > Communication
4. Enter the required fields for configuration and basic monitoring:
l Telnet/SSH Username
l Telnet/SSH Password
l enable Password
5. Enter the required fields for WMS Offload:
l SNMPv3 Username
l Auth Password
l SNMPv3 Auth Protocol
l Privacy Password
l SNMPv3 Privacy Protocol
The authentication and privacy protocols should be SHA-1 and DES in order for WMS Offload to work.
6. Click Save.