Setup Guide
12 | Common Configuration Options Dell PowerConnect W-AirWave 7.6 | Getting Started Guide
Figure 5: Client Count Trigger
3. Specify either a maximum (at most) or minimum (at least) value for the client count.
4. Specify the Severity level for the trigger.
5. Specify the Duration during which you want the event to be polled and the conditions of the trigger. For
example, you may want to set up a trigger to see if less than two users are on your network for fifteen minutes
during a time when you recognize there should be peak activity. Triggers with conditions can be configured to
fire if any criteria match as well as if all criteria match.
6. Specify whether to limit this trigger to devices, radios, or BSSIDs.
7. Specify conditions for this trigger, such as whether this trigger will apply to specific devices, interface types, etc.
8. Specify the Folder and Group to which this trigger should be applied. You can also select whether to include
subfolders of the selected Folder.
9. Specify an optional note to be applied to this trigger. This note will serve as the message subject for e-mailed
alerts.
10. Specify whether you want notifications to be emailed to your or sent via NMS (if an NMSserver is available).
11. Specify whether the trigger should display by role or by triggering agent.