Users Guide

Dell PowerConnect W-AirWave 7.4 | User Guide Discovering, Adding, and Managing Devices | 117
 Monitoring Data for Wired Devices (Routers and Switches)
 Understanding the APs/Devices > Interfaces Page
 Auditing Device Configuration
 Using Device Folders (Optional)
Viewing Device Monitoring Statistics
You can view many useful device monitoring statistics in the APs/Devices > List page. The APs/Devices > List
page displays Clients and Usage interactive graphs (formerly Users and Bandwidth prior to 7.4) and lists all
devices that are managed or monitored by AirWave.
To see only the Up devices, you can click the Up link in the Top Header Stats bar (next to the green arrow). This
displays the APs/Devices > Up page with the same information, but only containing active devices. You can do
the same with the Down and Mismatched top header stats links.
Use the Go to folder field to filter the list by folder, or click Expand folders to show all APs/Devices if you are
looking at a filtered device list. A lock icon in the Configuration column indicates that the device in that row is in
Monitor only mode. Figure 76 illustrates this page.
Figure 76 APs/Devices > List (partial view)
Verify that the devices you added are now appearing in the devices list with a Status of Up.
The same section also appears on the Groups > Monitor page, and is hyperlinked from a controller's monitoring
interface.
The Alert Summary section of APs/Devices > List cites the number of events that have occurred in the last two
hours, the last 24 hours, and total. There are four categories of alerts as listed below:
 AMP Alerts
 IDS Events
NOTE: Newly added devices will be status Down until they have been polled the first time. They will be configuration Unknown
until they have finished verification. The Up status is not contingent on verification.