Users Guide

Dell PowerConnect W-AirWave 7.4 | User Guide Using RAPIDS and Rogue Classification | 169
Setting Up RAPIDS
The RAPIDS > Setup page allows you to configure your AMP server for RAPIDS. Complete the settings on this
page as desired, and select Save. Most of the settings are internal to how AMP will process rogues.
Basic Configuration
On the RAPIDS > Setup page, the Basic Configuration section allows you to define RAPIDS behavior settings.
Figure 118 illustrates this page and Figure 118 describes the fields:
Table 93 RAPIDS > Overview Fields and Descriptions
Summary Description
IDS Events Displays a list of attack types for the designated folder and subfolders. Field displays events from the past
two hours, the past 24 hours, and total IDS events. Names of attacks link to summary pages with more
details.
Note: AMP should be configured as the SNMP trap receiver on the controllers to receive IDS traps. See
the Dell PowerConnect W-AirWave 7.4 Best Practices Guide in Home > Documentation for details.
Device Count by
RAPIDS
Classification
A pie chart of rogue device percentages by RAPIDS classification.
RAPIDS
Classification
A summary list with details of the statistics depicted in the Device Count by RAPIDS Classification pie
chart. Click the linked classification name to be taken to a filtered rogue list.
RAPIDS Devices by
OS
A pie chart of RAPIDS percentages by the detected operating system.
Operating System Detected operating systems represented in this summary listing. Click on the linked Operating System
name to see the rogues list filtered by that classification.
OS scans can be run manually or enabled to run automatically on the RAPIDS > Setup page.
Acknowledged
RAPIDS Devices
A color coded pie chart comparing the number of acknowledged devices to the unacknowledged
devices.
RAPIDS Changes Tracks every change made to RAPIDS including changes to rules, manual classification, and components
on the RAPIDS > Setup page. A link at the top of the list directs you to the RAPIDS > Audit Log page.