Users Guide

Dell PowerConnect W-AirWave 7.4 | User Guide Performing Daily Administration in AirWave | 193
Setting Triggers for RADIUS Authentication Issues
Perform the following steps to configure RADIUS-related triggers.
a. Choose a trigger type from the RADIUS Authentication Issues list in the drop-down Type menu. Table
112 itemizes and describes the condition settings for each RADIUS Authentication trigger type.
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of “Creating New
Triggers” on page187 to create a new trigger.
Setting Triggers for IDS Events
Perform the following steps to configure Intrusion Detection System (IDS)-related triggers.
a. Choose the Device IDS Events trigger type from the drop-down Type menu. See Figure 133. Table 113
describes condition settings for this trigger type.
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of “Creating New
Triggers” on page187 to create a new trigger.
Table 112 RADIUS Authentication Trigger Types and Condition Settings
Option Description
Client RADIUS
Authentication Issues
This trigger type sets the threshold for the maximum number of failures before an alert is issued for a
user. Select Add New Trigger Condition
to specify the count characteristics that trigger an alert. The
Option, Condition, and Value fields allow you to define the numeric value of user issues.
Device RADIUS
Authentication Issues
This trigger type sets the threshold for the maximum number of failures before an alert is issued for a
device. The Option, Condition, and Value fields allow you to define the numeric value of user issues.
Total RADIUS
Authentication Issues
This trigger sets the threshold for the maximum number of failures before an alert is issued for both
users and devices.
Table 113 Device IDS Events Authentication Trigger Types and Condition Settings
IDS Trigger
Options
Description
Device IDS Events This trigger type is based on the number of IDS events has exceeded the threshold specified as Count in
the Condition within the period of time specified in seconds in Duration. Alerts can also be generated for
traps based on name, category or severity. Select Add New Trigger Condition to specify the count
characteristics that trigger an IDS alert.
Rogue Device
Classified
This trigger type indicates that a device has been discovered with the specified Rogue Score. Ad-hoc
devices can be excluded automatically from this trigger by selecting Yes. See “Using RAPIDS and Rogue
Classification” on page 167 for more information on score definitions and discovery methods.
Once you choose this trigger type, select Add New Trigger Condition to create one or more conditions. A
condition for this trigger enables you to specify the nature of the rogue device in multiple ways.
Client on Rogue
AP
This trigger type indicates that a client has associated to a rogue AP. Available conditions include rogue
classification, and whether the client is valid.