Users Guide

200 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave 7.4 | User Guide
Figure 138 AMP Setup > Users Page Illustration
3. The newly created login information should be provided to the person or people who will be responsible for
creating guest access users.
4. The next step in creating a guest access user is to navigate to the Clients > Guest Users tab. From this tab,
you can add new guest users, you can edit existing users, and you can repair guest user errors.
This page displays a list of guest users and data, to include the expiration date, the SSID (for Cisco WLC) and
other information. Figure 139 illustrates this page and Table 117 describes the information.
Figure 139 Clients > Guest Users Page Illustration
Table 117 Clients > Guest Users Fields
Field Description
Repair Guest User
Errors
Sets AirWave to attempt to push the guest user again in an attempt to repair any errors in the Status
column.
Add New Guest User Adds a new guest user to a controller via AirWave.
Username Randomly generates a user name for privacy protection. This name appears on the Guest User detail
page.
Enabled Enables or disables the user status. Set the status of the guest user as active (enabled) or expired
(disabled).
Email Displays the optional email address of the user.
Company Name Displays the optional company name for the user.
Sponsor Name Displays the name of the sponsor for the guest user. This setting is optional.
Expiration Displays the date the guest user's access is to expire.
WLAN Profile Sets the SSID that the guest user can access. This setting applies to Cisco WLC only.