Users Guide

206 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave 7.4 | User Guide
Quick Links for Clients on Dell Devices
In Clients > Client Detail, two drop-down menus were added in AirWave 7.3 next to the Save button in the
Device Info section:
 Open controller web UI: A drop-down menu that allows you to jump to the controller’s UI in a new window.
Thin APs link to Controller > Access Points when not operating in mesh mode, or Controller > Mesh Nodes
otherwise. Controllers show several more pages in this menu (Security Dashboard, for instance) if the
controller is running AOS version 6.1 or greater.
 Run a command: A drop-down menu with a list of CLI commands you can run directly from the APs/Devices
> Monitor page.
Figure 145 Open controller web UI and Run a command Menus in Clients > Client Detail
Using the Deauthenticate Client Feature
Some displays of the Clients > Client Detail page include the Deauthenticate Client feature in the Current
Association section. Specifically, those displays are for devices which support this operation, namely Dell and
Cisco WLC with firmware version v4.0.0.0 or later.
Select Deauthenticate Client to use this feature, as shown in Figure 146:
Figure 146 Deauthenticate Client button in Current Association section of Clients > Client Detail
Viewing a Client’s Association History
Past association details of a client are tracked in the Association History table, which is located under the VRF
QuickView illustration (if available) and the Alert Summary in Clients > Client Detail.
The columns in this table, shown in Figure 147, are the same as the fields in the Current Association section for
this user.
Figure 147 Association History in Clients > Client Detail
Viewing the Rogue Association History for a Client
Past association details of a rogue client are tracked in the Rogue Association History table, which is located
under the Association History table in Clients > Client Detail.