Users Guide

216 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave 7.4 | User Guide
Using the System > Configuration Change Jobs Page
Schedule configuration change jobs are summarized on the System > Configuration Change Jobs page. Perform
the following steps to use this page, illustrated in Figure 154.
Figure 154 System > Configuration Change Jobs Page Illustration
1. To edit an existing configuration change job select on the linked description name. On the subsequent edit
page you can choose to run the job immediately by selecting Apply Changes Now, reschedule the job by
selecting Schedule, Delete the job, or Cancel the job edit.
2. Select the linked AP or group name under the Subject column to go to its monitoring page.
3. Select the linked group and folder names under Folder or Group to go to the AP's folder or group page.
4. Scheduled configuration change jobs will also appear on the Manage page for an AP or the Monitoring page
for a group.
Using the System > Firmware Upgrade Jobs Page
The System > Firmware Upgrade Jobs page displays a list of recent firmware upgrade jobs that have been
initiated in the APs/Devices > Manage page or Modify Devices page for a controller or autonomous AP that
supports firmware upgrades in AMP.
Successful upgrade jobs are not archived on this page -- generally you visit this page to review failed or pending
firmware upgrade jobs.
Users with the AP/Device Manager role and higher can view this page. Audit-only users cannot view this page or
tab.
Figure 155 System > Firmware Upgrade Jobs Page Illustration
You can perform the following operations on this page:
 To restart failed firmware upgrade jobs, select the checkboxes next to the rows you want to restart and select
the Restart Failed Jobs button.
 To stop a pending upgrade job and remove it from the list, select the Cancel and Delete Jobs button.
 Use additional links on the page as shortcuts to the Device Setup > Upload Firmware & Files page, or the
complete raw text of the Firmware Server Log