Users Guide

12 | Dell PowerConnect W Configuration in AirWave Dell PowerConnect W-AirWave 7.4 | Configuration Guide
Groups > Dell PowerConnect W Config Page With Global Configuration Enabled
When Use Global Dell PowerConnect W Configuration is enabled in AMP Setup > General, focused submenu
page displays and edits all configured Dell PowerConnect W AP groups, with the following factors:
 Dell PowerConnect W AP Groups must be defined from the Device Setup > Dell PowerConnect W
Configuration page before they are visible on the Groups > Dell PowerConnect W Config page.
 Use this page to select the Dell PowerConnect W AP Groups that you push to controllers.
 Use this page to associate a device group to one or more Dell PowerConnect W AP Groups.
 From this page, you can select other profiles that are defined on the controller, like an internal server.
Figure 3 Groups > Dell PowerConnect W Config Page Illustration (Partial Display)
Groups > Dell PowerConnect W Config When Global Configuration is Disabled
If Use Global Dell PowerConnect W Configuration in AMP Setup > General is set to No, the Groups > Dell
PowerConnect W Config page can be used to manage two or more distinctive configuration strategies using the
same tree navigation as the Device Setup > Dell PowerConnect W Configuration page, as shown in Figure 4.
Each of the sections is explained in “Dell PowerConnect W Configuration Sections in the Tree View” on
page13.