Users Guide

Dell PowerConnect W-AirWave 7.4 | Configuration Guide Configuration Reference | 121
3. Select Add or Save. The added or edited profile appears on the Profiles > RF > Optimization page.
Profiles > SSID
Configures network authentication and encryption types. This profile also includes references an EDCA
Parameters Station Profile, an EDCA Parameters AP Profile and a High-throughput 9HT) SSID profile.
Hole Good RSSI
Threshold
(0-65,535)
20 Set the amount of time in seconds during which Received Signal Strength Indication (RSSI)
is to check coverage holes.
NOTE: This setting requires a Wireless Intrusion Protection license.
Hole Good Station
Ageout (sec)
30 Set the amount of time in seconds that an AP is unseen by any probes before it is deleted
from the database. Enter 0 to disable ageout.
NOTE: This setting requires a Wireless Intrusion Protection license.
Hole Detection
Interval (sec)
180 Sets the amount of time in seconds in which automatic hole detection should check for
coverage holes. Enter 0 to disable this function.
NOTE: This setting requires a Wireless Intrusion Protection license.
Hole Idle Station
Timeout (sec)
90 Sets the amount of time in seconds before which an idle AP is deleted from the database,
once it has become idle. Enter 0 to disable this function.
NOTE: This setting requires a Wireless Intrusion Protection license.
Hole Poor RSSI
Threshold
(0-65,535)
10 Sets the threshold at which RSSI deems coverage to be poor.
Detect Interference No Enables or disables interference detection for the APs to be configured with this
optimization profile.
Interference
Threshold
(0-100%)
100 Sets the maximum allowable interference to be tolerated by APs that are configured with
this optimization profile, as a percentage.
Interference
Threshold Exceed
Time
(0-360000 sec)
60 Sets the amount of time in seconds during which interference is allowed to exceed the
threshold percentage. When interference exceeds the threshold percentage longer than
the amount of time specified in this field, the threshold has been exceeded.
Interference Baseline
Time
(0-360000 sec)
600 Sets the period of time in seconds during which interference levels are to be monitored.
This setting governs the deployment of the interference percentage threshold and the
threshold exceed time.
RSSI Falloff Wait Time
(0-8 sec)
0 Sets the maximum time to wait with decreasing received signal strength indication (RSSI)
before de-authorization is sent to the client.
Low RSSI Threshold
(0-255)
0 Sets the low threshold for received signal strength indication (RSSI). If the RSSI for a
specific client falls below this threshold and continues to fall for the RSSI Falloff Wait Time,
then the AP sends a de-authorization command to the client. Such de-authorization
removes the client from the current AP and forces it to re-authentication on a nearby AP.
RSSI Check Frequency
(0-255)
0 Sets the amount of time in seconds between RSSI coverage checks.
Table 57 Profiles > RF > Optimization Profile Settings (Continued)
Field Default Description