Users Guide

Dell PowerConnect W-AirWave 7.4 | Configuration Guide Configuration Reference | 143
Security > Policies > Destinations
The Security > Policies > Destinations page lists the destination names currently configured, with the Policy
that uses the destination and the folder. To create a new destination to be referenced by a security policy, click
the Add New Net Destination button. To edit an existing policy, click the pencil icon.
The Security > Policies > Add New Destinations page contains the following fields, as described in Table 70:
Select Add to complete the configuration of the Destination policy profile, or click Save to complete the editing
of an existing profile. The new destination appears on the Security > Policies > Destinations page.
Security > Policies > Services
The Security > Policies > Services page displays all Netservice profiles that are available for reference by Security
policies. This page displays Netservice profile names, the protocol associated with it, the policy that uses this
Netservice profile, and the folder.
Select Add to create a new Netservice profile, or click the pencil icon next to an existing Netservice profile to edit
it. The Security > Policies > Services page contains the following fields, as described in Table 71:
Table 70 Security > Policies > Destinations Fields and Descriptions
Field Default Description
General Settings
Folder Top Set the folder with which the security policy is associated. The drop-
down menu displays all folders available for association with the policy.
Name Blank Enter the name of the destination.
Rules
Invert No Use this field to invert the destination from one end of the VPN
connection to the other.
IPv6 No Select this button to create a new rule for this destination profile. Clicking
this button displays the Net Destination Rule section for the selected
protocol, which is comprised of two settings:
 Rule Type—Specify whether the rule applies to Host, Network,or
Range.
 IP Address—Enter the IP address for the net destination rule.
Table 71 Security > Policies > Services Fields and Descriptions
Field Default Description
General Settings
Folder Top Set the folder with which the security policy service is associated. The drop-down
menu displays all folders available for association with the service.
Name Blank Enter the name of the destination.