Users Guide

22 | Dell PowerConnect W Configuration in AirWave Dell PowerConnect W-AirWave 7.4 | Configuration Guide
If the page reports a device mismatch, the page will display an Import button that allows you to import the
Dell PowerConnect W-Series controller settings from a Dell PowerConnect W-Series controller that has
already been configured. To import the complete configuration from the controller (including any
unreferenced profiles) select the Include unreferenced profiles checkbox. If you deselect the checkbox, AMP
will delete the unreferenced profiles/AP Groups on the controller when that configuration is pushed later, and
they will not be imported.
In Global Configuration:
Importing this configuration creates all the Profiles and Dell PowerConnect W AP Groups on the Device
Setup > Dell PowerConnect W Configuration page. This action also adds and selects the Dell
PowerConnect W AP Groups that appear on the Groups > Dell PowerConnect W Config page.
The folder for all the Profiles and Dell PowerConnect W AP Groups is set to the top folder of the AirWave
user who imports the configuration. This folder is Top in the case of managing administrators with read/write
privileges.
In Group Configuration:
Importing this configuration creates Profiles and Dell PowerConnect W AP Groups in the controller’s Groups
> Dell PowerConnect W Config page.
5. After configuration file import is complete, refresh the page to verify the results of the import and add or edit
as required.
6. Navigate to the Dell PowerConnect W Configuration page.
 This page displays a list of APs authorized on the AMP that are using the Dell PowerConnect W AP
Group.
 The User Role is the Dell PowerConnect W User Role used in firewall settings. For additional
information, refer to “Security > User Roles” on page127.
 Global Configuration only: The Folder column cites the visibility level to devices in each Dell
PowerConnect W AP Group. For additional information, refer to “Visibility in Dell PowerConnect W
Configuration” on page33.
7. Add or modify Dell PowerConnect W AP Groups as required:
a. Navigate to the Dell PowerConnect W Configuration > Dell PowerConnect W AP Groups page.
b. Click Add from the Dell PowerConnect W AP Groups page to create a new Dell PowerConnect W AP
Group. To edit a Dell PowerConnect W AP Group, click the pencil icon next to the group. The Details
page for the Dell PowerConnect W AP Group appears. This page allows you to select the profiles to apply
to the Dell PowerConnect W AP Group, and to select one or more WLANs that support that Dell
PowerConnect W AP Group. Figure 15 illustrates this page.