Users Guide

58 | Configuration Reference Dell PowerConnect W-AirWave 7.4 | Configuration Guide
Server Group default Enter the name of the internal VPN authentication server group, or the server
group that performs 802.1x authentication.
Other Settings
Default Role default Role assigned to the Captive Portal user upon login. When both user and guest
logon are enabled, the default role applies to the user logon; users logging in
using the guest interface are assigned the guest role. The Policy Enforcement
Firewall license must be installed.
Default Guest Role default Role assigned to a guest user upon login.
Redirect Pause
(0-60 sec)
10 Time, in seconds, that the system remains in the initial welcome page before
redirecting the user to the final web URL. If set to 0, the welcome page displays
until the user clicks on the indicated link.
User Login Yes Enables Captive Portal with authentication of user credentials.
Guest Login No Enables Captive Portal logon without authentication.
Logout Popup Window Yes Enables a pop-up window with the Logout link for the user to logout after logon.
If this is disabled, The user remains logged in until the user timeout period has
elapsed or the station reloads.
Use HTTP Authentication No Use HTTP protocol on redirection to the Captive Portal page. If you use this
option, modify the captive portal policy to allow HTTP traffic.
Logon Wait Minimum
Wait (1-10 sec)
5 Minimum time, in seconds, the user will have to wait for the logon page to pop
up if the CPU load is high. This works in conjunction with the Logon wait CPU
utilization threshold parameter.
Logon Wait Maximum
Wait
(0-10 sec)
10 Maximum time, in seconds, the user will have to wait for the logon page to pop
up if the CPU load is high. This works in conjunction with the Logon wait CPU
utilization threshold parameter.
Logon Wait CPU
Utilization Threshold (0-
100%)
60 CPU utilization percentage above which the Logon wait interval is applied
when presenting the user with the logon page.
Max Authentication
Failures
0 Maximum number of authentication failures before the user is blacklisted.The
range is 1-10. Requires a Wireless Intrusion Protection license or an RFprotect
license.
Show FQDN No Allows the user to see and select the fully-qualified domain name (FQDN) on
the login page.
Use CHAP
(Non-standard)
No Use CHAP protocol. You should not use this option unless instructed to do so by
a representative from Dell PowerConnect W.
Sygate-on-demand-
agent
No Enables client remediation with Sygate-on-demand-agent (SODA). Requires a
Client Integrity license and a version earlier than 6.0.0.0.
Login Page /auth/index.html URL of the page that appears for the user logon. This can be set to any URL.
Welcome Page /auth/
welcome.html
URL of the page that appears after logon and before redirection to the web
URL. This can be set to any URL.
Show Welcome Page Yes Enables the display of the welcome page. If this option is disabled, redirection
to the web URL happens immediately after logon.
Table 11 Profiles > AAA > Captive Portal Auth Profile Settings (Continued)
Field Default Description