Users Guide

72 | Configuration Reference Dell PowerConnect W-AirWave 7.4 | Configuration Guide
2. Select the Add button to create a new profile, or click the pencil icon next to an existing profile to edit.
Complete the settings as described in Table 23:
3. Select Add or Save. The added or edited profile appears on the AP Authorization page, and on the details
page.
Profiles > AP > Ethernet Link
The configurable speed defined in this profile is dependent on the port type, and you can define a separate
Ethernet Interface profile for each Ethernet link.
Perform these steps to configure a Ethernet Link profile.
1. Select Profiles > AP > Ethernet Link in the navigation pane.
2. Select the Add button to create a new profile, or click the pencil icon next to an existing profile to edit.
Complete the settings as described in Table 24:
3. Select Add or Save. The added or edited Ethernet Link profile appears on the AAA Profiles page, and on the
802.1x Auth details page.
Profiles > AP > Provisioning
Perform these steps to define a provisioning profile for an AP or group of APs:
1. Select Profiles > AP > System in the navigation pane. This page summarizes the current profiles of this type.
Table 23 Profiles > AP > Authorization Profile Settings
Field Default Description
General Settings
Folder Top Set the folder with which the profile is associated. The drop-down menu displays all
folders available for association with the profile.
Name Blank Enter the name of the profile.
Referenced Profiles
AP Authorization Group None Designates the profile to reference. Refer to “Dell PowerConnect W AP Groups” on
page 35.
Table 24 Profiles > AP > Ethernet Link Profile Settings
Field Default Description
General Settings
Folder Top Set the folder with which the profile is associated. The drop-down menu displays all
folders available for association with the profile.
Name Blank Enter the name of the profile.
Other Settings
Speed (Mbps) auto Designates the speed of the Ethernet link for this profile. Options are 10, 100,or1000
Mbits.
Duplex auto Defines this profile to support duplex Ethernet. Options are full, half,orauto.