Deployment Guide

l Model & software version identification
Alcatel-Lucent OmniSwitch (6250 and 6450)
l Automated discovery through SNMP
l Model & software version identification
l Stack information
l Firmware version 6.6.1.859.R01
Other Devices with Monitoring Support
This version of AirWave supports monitoring for a variety of devices with software versions listed here:
Device Supported Firmware
BelAir 200 main.2005.03.29
Cisco 4800 (Pre-VxWorks) 8.65.2
HP MSM7xx and APs 5.5.3.0-01
HP ProCurve 420 2.0.38 - 2.2.5
HP ProCurve 530 WA.01.16-WA.02.19
HP ProCureve 2626-PWR H.10.35 (ROM H.08.02)
HP 5406 zl Switch K.12.43 (ROM:K.12.12)
HP WESM controllers & APs
l xl
l zl
l WS.01.05 – WS.02.19
l WT.01.03 – WT.01.28
Juniper Switch 10.4R1.9
Meru MC1000, MC3000, MC5000 3.3-118 – 3.6.1-49
Proxim AP-600/700
Proxim AP 2000/4000
2.0 – 4.0.2
Proxim Tsunami MP.11 QB 954-x, 2454-x, 4954-x, 5054-x 2.3.0 – 4.0.0
Symbol 3021 04.01-23 – 04.02-19
Symbol 4121/4131 3.51-20 – 3.95-04
Symbol 5131/5181 1.1.0.0.045R – 2.5.0.0
Trapeze MXR-2, MXR-8, MXR-20, MXR-2xx, MX-400,
MP-3x2, MP-422
5.0.12.2 – 7.0.5.6
Tropos 3/4/5210/5320/9422/9532 5.1.4.7 – 6.6.1.3
Table 5: Other Supported Devices
Dell Networking W-AirWave 7.7 | Supported Infrastructure Devices 5