Users Guide

112 | Configuring and Using Device Groups in AWMS Dell PowerConnect W AirWave 7.1 | User Guide
Configuring Group PTMP/WiMAX Settings
The Groups > PTMP/WiMAX configuration page configures Point-to-Multipoint and WiMAX settings for all
subscriber and base stations in the device group. Subscriber stations must be in the same group as all base stations
with which they might connect.
Packet identification rules (PIR) are used to identif
y traffic types. Service flow classes define the priority given to
traffic. Subscriber Station classes link traffic types (PIRs) with service flow classes to fully define how packets
should be handled.
Perform the following steps to
configure these functions.
1. Navigate to the Gr
oups > List page and select the group for which to define PTMP/WiMAX settings by
clicking the group name. Alternatively, click Add from the Groups > List page to create a new group, define a
group name. In either case, the Monitor page appears.
2. Click the PTMP/WiMAX tab in the AWMS
navigation menu. Figure 61 illustrates this page.
Figure 61 Group
s > PTMP/WiMAX Page Illustration
3. Define the settings on this page. Table 71 describes the settings and default values.
Table 71 Groups > PTMP/WiMAX Fields and Default Values
Setting Default Description
Proxim MP.16 Section
3.5GHz WiMAX Channel Bandwidth 3.5GHz Sets the frequency used by the WiMAX
devices in the group.
BSID 00:00:00:00:00:00 Defines the BSID used by
the subscriber stations in the group. To
define the BSID for a base station, refer to its APS/Devices >
Manage configuration page.
Configure Packet Identificatio
n Rules N/A This link takes you to the list of packet identification rules for the
group being configured. You can select rules to apply and add
new rules, then return to the Group WiMAX page.
Configure Service Flow Classes N/A This link takes you to the list of service flow classes for the group
be
ing configured. You can select service flow classes to apply
and add new classes, then return to the Group WiMAX page.
Configuration Subscriber Station
Classes
N.A This link takes you to the list of sub
scriber station classes. You
can select subscriber station classes to apply and add new
classes, then return to the Group WiMAX page.
Proxim MP.16 Section
802.11a Radio Channel 58 Selects the channel used for 802.11a radios by the devices in this
gr
oup.