Users Guide
Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 121
You can change the configuration for either or both groups by clicking Edit in the corresponding column
heading. The appropriate configuration page appears.
If you make and save changes to either or both groups, navigate back to the Groups > List page and click
Compare two groups. Select the same two groups again for updated information.
Additional topics in this document or in the Aruba Configuration Guide describe the many fields that can
appear on the Groups > List > Compare page.
Deleting a Group
Perform the following steps to delete an existing Group from the AWMS database:
1. Browse to the G
roups > List configuration page.
2. Ensure that the Group you wish to del
ete is not marked as the default group. AWMS does not permit you to
delete the current default Group.
3. Ensure there are no devices in the Group you wish to del
ete. AWMS does not permit you to delete a Group
that still contains managed devices. You must move all devices to other Groups before deleting a Group.
4. Select the checkbox and click De
lete.
Changing Multiple Group Configurations
Perform the following steps to make any changes to an existing group's configuration:
1. Browse to the G
roups > List configuration page.
2. Click the Ma
nage link (the pencil icon) for the group you wish to edit. The Groups > Basic configuration
page appears.
3. Select the fields to be edited on the Basi
c configuration page or navigate to Radio, Security, VLANs, or MAC
ACL configuration page and edit the fields. Use the Save button to store the changes prior to applying them,
or click Save and Apply to save and push configurations.
4. When all changes for the group are complete click the Save and
Apply button. Figure 69 illustrates the
confirmation message that appears.
Figure 69 Configuration Change Confirmation
5. AWMS displays a Configuration Change screen
confirming the changes that will be applied to the group's
settings.
6. There are several action possibilities from within this confirmation configuration page.
Apply Changes Now —This button applies the changes immediately to access points within the group. If
you wish to edit multiple groups you must use the Preview button.