Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Discovering, Adding, and Managing Devices | 151
Table 83 describes graph information displayed in the Graphical Data pane.
Table 84 describes the fields and inform
ation displayed for the Connected Users display.
Bandwidth Displays the amount of bandwidth being pushed through the corresponding radio interface or device at the
time of the last polling.
MAC Address Displays the MAC address of the corresponding radio in the AP.
Last RAD Scan Displays the last time the device performed a wireless rogue scan and the number
of devices discovered
during the scan.
Notes Provides a free-form text field for entering fixed asset
numbers or other device information. This
information is printed on the nightly inventory report. Notes can be entered on the APs/Devices > Manage
page.
a. Field is only visible for Mesh APs.
b. Field is only visible for Mesh APs.
c. Field is only visible for Mesh APs.
d. Field is only visible for Mesh APs.
Table 83 APs/Devices > Monitor > Graphical Data Fields and Default Values
Graph Description
User Shows the max and average user count reported by the device radios for a configurable period of time.
User count for controllers are the sum of the user count on the associated APs. Checkboxes below the
graph can be used to limit the data displayed.
Bandwidth Shows the bandwidth in and out reported by the device for a configur
able period of time. Bandwidth for
controllers is the sum of the associated APs. Checkboxes below the graph can be used to limit the data
displayed.
CPU Utilization
(controllers only)
Reports overall CPU utilization (not on a per
-CPU basis) of the controller.
Memory Utilization
(controllers only)
Reports average used and free memory and average max memory for the controller.
Channel Utilization
(Aruba controllers on
supported firmware
versions only)
Displays max and average percentages per-radio for busy, interfering receiving and transmitting
signals. Special configuration on the controller is required to enable this data; consult the Aruba Best
Practices Guide for details.
Table 84 APs/Devices > Monitor > Connected Users Fields and Default Values
Field Description
User Provides the name of the User associated to the AP. AWMS gathers this data in a variety of ways. It can be
taken from RADIUS accounting data, traps from Cisco VxWorks APs and tables on Colubris APs.
MAC Address Displays the Radio MAC address of the user associated to th
e AP. Also provides a link that redirects to the
Users > Detail page.
Radio Displays the radio to which the user is associated.
Association Time Displays the first time AWMS recorded the MAC
address as being associated.
Duration Displays the length of time the MAC address has been associated.
Table 82 APs/Devices > Monitor > General Fields and Default Values (Continued)
Field Description